How often to rotate truck tires: mileage ranges for pickups, medium-duty and semi trucks, patterns by axle layout, and the wear signs that mean rotate sooner.
How to inspect a trailer kingpin and upper coupler: gauge steps, the 1/8-inch wear limit, 1-degree squareness, replacement rules, and what your fleet should record.
How to inspect a service truck crane: which OSHA rules apply, who must inspect and when, what to check, what records to keep, and when to call a mobile mechanic.
How to diagnose a charging system: battery and alternator voltage targets, voltage-drop limits, smart-charging traps and when to call a mobile mechanic.
Coolant service intervals for fleet trucks and vans: OEM mileage and time limits for gas and diesel engines, severe-service rules, and warning signs to act early.
Truck won't start on the shoulder? Make it safe, work out no-crank versus crank-no-start, run safe checks, and give a mobile mechanic what they need.
What brake imbalance means in a DOT commercial vehicle inspection, which federal limits apply, what causes it, and what to do before the truck goes back on the road.
Learn how to run a voltage drop test on a truck: meter setup, starter, ground and charging circuit steps, acceptable readings, and common mistakes.
How telematics maintenance alerts work, which data triggers them, how to route them to the right person, and how to act on fault codes before they strand a truck.
A diesel that idles fine but has no power under load usually has a fuel, air, exhaust or boost problem. Here is how fleet techs find it and when to stop driving.










